Policy & Objects missing "group" in v.5.2.2

[YtseJam]

Hi all,

I can't see the group under Policy & Objects>Objects. I just want to add in a group the addresses I created. 

Thanks

[AndreaSoliva · Accepted solution]

Hi

If you do not see any menu on the browser which you have the opinion you should see keep following in mind:

- Use standard browser (mostly it is a browser issue specialy with browser liek Chrome or Safari). I personally using FireFox Portable and disabled every update etc. using 29 since month without any issue. If you like to use after some time another version download one like 32 meaning portable and test. etc.

- Look at following command to enable some missing gui stuff:

# config system global

# get | grep gui

You see what gui is enabled and which one not and can enable it with set xxxxxxx enable.

hope this helps

Andrea

[AndreaSoliva · Accepted solution]

Hi

If you do not see any menu on the browser which you have the opinion you should see keep following in mind:

- Use standard browser (mostly it is a browser issue specialy with browser liek Chrome or Safari). I personally using FireFox Portable and disabled every update etc. using 29 since month without any issue. If you like to use after some time another version download one like 32 meaning portable and test. etc.

- Look at following command to enable some missing gui stuff:

# config system global

# get | grep gui

You see what gui is enabled and which one not and can enable it with set xxxxxxx enable.

hope this helps

Andrea

[AndreaSoliva · Accepted solution]

by the way upgrade to 5.2.3 because 5.2.2 is horrible full of bugs (See Release Notes 5.2.3 a looooooooong list :) ) For me 5.2.2 is absolutly not useable for a security device.

Andrea

[YtseJam]

Hi Adrea,

Good day, thank you for your info. Anyway, I'll just upgrade then my firmware to v5.2.3. :)

Regards,

Jam