I am looking at setting up Performance SLA on Fortinet which i have done on Fortimanager, however what the requirement is for this is over the network report on this within the FAZ if possible.
What I need is a list of the devices that are on the network then along with this a count where it may have failed the various SLA targets, so for example.
Device Ping ICMP
80f-1 - 3 0
So I am only interested where the SLA has breached my target of say 20m/s on a monthly basis across the various SLA's not every single one.
Is this possible at all out of the box as can only see a handful of reports that can provide some kind of SLA but this a generalisation across the board.
Hello Timsellis,
Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.
Thanks,
Hello,
We are still looking for an answer to your question.
We will come back to you ASAP.
Thanks,
Hello Timsellis,
I found this solution. Can you tell us if it helps, please?
To achieve the desired report on FortiAnalyzer, you need to ensure that the necessary configurations are in place on your FortiGate and FortiAnalyzer. Here’s a step-by-step guide:
If the out-of-the-box reports do not meet your specific needs, consider creating a custom report on FortiAnalyzer that filters and displays only the SLA breaches according to your criteria.
User | Count |
---|---|
2624 | |
1390 | |
804 | |
667 | |
455 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.