Hi,
We have Fortigate 100D and recently we upgraded to 5.2.1
After the upgrade we don't have the "Per-IP Bandwidth" widget and we can't find any way (non even in the CLI) to see who is consuming most of the bandwidth.
Is there a way to get this feature back or any easy workaround?
it's kinda stupid for Fortinet to remove features in their upgrades, it feels more like a downgrade.
Please assist,
Thanks.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
hi,
please don't cross-post in multiple forums. This will not get you more answers. Thank you.
Now to your question:
A quick search brings up this recent post: https://forum.fortinet.com/tm.aspx?m=112943
The per-IP bw widget can be installed in the CLI in version 5.x.
But in 5.2.x it's dropped completely in favor of the new FortiView page.
Sorry for the multi post. wasn't sure where to place it.
The Fortiview doesn't show things like the current (live) bandwidth consumption or am i missing it there somewhere?
dimak wrote:Sorry for the multi post. wasn't sure where to place it.
The Fortiview doesn't show things like the current (live) bandwidth consumption or am i missing it there somewhere?
FortiView with Source address can do better results that old Per-IP Widget... On Per-IP the device sum all session for the user. On Fortiview you can filter data between LAN -> Internet, for example.
Regards, Paulo Raponi
But i don't need the sessions, i want to know how much bandwidth is being used right now by an ip.
for example if people complain that the internet works slow and i see that their connection uses 100% of it's capacity so i need to know who consumes most of it, we have from time to time some users that try for example to download something big and i want to find them.
dimak wrote:But i don't need the sessions, i want to know how much bandwidth is being used right now by an ip. [...]
Not sure what you are requesting, but the Top Sessions sorted by bytes does give the bandwidth used per IP disregarding the number of sessions opened by each IP.
NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
I do understand what you show me.
but what i mean is for example if we have a 30MB/s internet line, i want to see for example that 192.168.1.2 uses 7MB/s and 192.168.1.3 uses 12MB/s etc...
I want to prevent a scenario that one ip for example 192.168.1.5 uses 28MB/s and all the others have only 2MB/s left.
That's what we could see with the older widget but we can't find anything like it on the 5.2.1 version.
I am having these same issues!! I want to figure out which IP is using all the bandwidth. Without the usage widget the fortiview does not appear to show this info. in the screenshot you shared it appears to show a counter for the session of total bytes sent/received, but not current bytes per second.
FG200D 5.6.5 (HA) - primary [size="1"]FWF50B' s 4.3.x, FG60D's 5.2.x, FG60E's 5.4.x [Did my post help you? Please rate my post.][/size] FAZ-VM 5.6.5 | Fortimail 5.3.11 Network+, Security+
Dear All,
i have the same problem using the latest 5.2.2 on my 100D.
I have two inet lines diagrams and when i see a lot of incoming traffic i need to know who is using that specific time how much traffic. Not the session but the real traffic. Also another thing is that in All session view you cannot sort the all the columns.
If there is any way to be able to see in realtime the usage of the bandwidth would be much appreciated as i have a lot of rules from lan to wan and i am not feeling very well if i dont know exactly who is downloading what in my network.Also i have al ot of DMZ rules so it would be helpfull to have the incoming traffic ,where goes in order to trace and to use the correct traffic shapping or security rules correct.
Thanks in Advanced.
There is not easy way to do this currently in 5.2.x. Closest thing is to use your FAZ top sources and set the time frame to 5 minutes.
Fortinet has acknowledge this issue. Based on much feedback, they will bring this feature back (probably as an improvement inside of FortiView area) in a future version. Probably version 5.4.x.
-Paul
FG200D 5.6.5 (HA) - primary [size="1"]FWF50B' s 4.3.x, FG60D's 5.2.x, FG60E's 5.4.x [Did my post help you? Please rate my post.][/size] FAZ-VM 5.6.5 | Fortimail 5.3.11 Network+, Security+
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.