I have a PPPOE connection with routed subnet but only get the gateway adres
subnet is 255.255.255.248 but the IP adres from the ISP I see 255.255.255.255
Is it possible to configure the ip-range manually in PPPOE?
Example of the ip-addresses I get from the ISP is:
Netwerk adres:192.0.2.8
Router IP-adres:192.0.2.9
Broadcast adres:192.0.2.15
Subnetmasker:255.255.255.248
And when I configure PPPOE i only see 192.0.2.9 mask 255.255.255.255 and the gateway adres of the profider
How do I use the 192.0.2.10-14 addresses?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
pppoe on a fortinet does not support manual ip configuration afaik.
Are you sure you have to do pppoe?
That sounds like static ip setup. Probably it does not requrie pppoe at all?
That's what I have here. I have one line that has a /29 subnet from isp and that has it's own router connected to it which establishes the connection to isp over fiber and I can connect my fgt to a lan port of this and have the /29 I got from ISP on that wan of my FGT.
--
"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
This is a Crossnetwork config and we need a PPPOE connection. Put a Cisco with Dialer between the ISP and the FG and it is working now. Pitty you cannot configure routed ip with FG.
I guess that in fact your provider gives you a fixed ip through the pppoe session and the assigned subnet is routed through the directly connected ip . You can do this with fortigate
How to configure that?
How do you want to use your subnet ?
Create ip-pools and than IPv4-policies for inbound traffic like smtp and https
I am not able to test the VIP because we do not want any downtime. With the cisco between the ISP and FG it is working fine. If I am in the oppertunity to test the VIP's I will, but can take a while.
Thanks for all the help so far.
For this I think it is enough to create a VIP for the ip you want to use from the subnet. Have you tried that?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1558 | |
1034 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.