Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
RFAHMI
New Contributor

PPPOE connection dropping WAN1

I have a high-speed bridge modem that's connected to WAN1. The connection keeps dropping constantly and I noticed that the webpage of a switch behind the FGT is not loading even though the ping is going through

 

When I plug in a routed modem everything is working fine. can this be related to lcp-echo-interval?

 

 
1 REPLY 1
Christian_89
Contributor III

Yes, it is possible that the issue you're experiencing with the high-speed bridge modem could be related to the LCP (Link Control Protocol) echo interval. LCP is a protocol used in PPP (Point-to-Point Protocol) connections to establish, configure, and test the link between devices.

The LCP echo interval determines the frequency at which echo request messages are sent between the PPP devices to ensure the link is active and functioning properly. If the LCP echo interval is too high or misconfigured, it can lead to intermittent connection drops or connectivity issues.

Here's how you can troubleshoot this issue:

1. Check LCP Echo Interval: Review the LCP echo interval setting on your FortiGate device and the bridge modem. Ensure that the values are consistent and appropriate for your network environment. Typically, the default interval is around 30 seconds.

2. Adjust LCP Echo Interval: If the LCP echo interval is set to a high value, consider reducing it to improve the responsiveness of the link and decrease the chance of connection drops. However, be cautious when making changes and ensure compatibility with the bridge modem.

3. Verify Modem Compatibility: Ensure that your bridge modem is compatible with the FortiGate device and supports the required PPP and LCP settings. Check for firmware updates for the modem that might address any known issues related to LCP.

4. Check Modem Configuration: Review the configuration settings on the bridge modem, specifically related to PPP and LCP. Verify that the settings align with the requirements of your FortiGate device and the network environment.

5. Contact ISP or Modem Manufacturer: If you have exhausted troubleshooting steps on your end and the issue persists, it's advisable to contact your Internet Service Provider (ISP) or the manufacturer of the bridge modem for further assistance. They can provide specific guidance or potential firmware updates to address the connectivity problems.

Remember to document any changes you make and their effects for future reference. It's also recommended to work closely with your network administrator or IT support team to ensure proper configuration and troubleshooting.

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors