Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Obie
New Contributor

PORT FORWARDING

Hey guys,

I followed the instruction on the cookbook to configure port forwarding with an application called go global. When i am connected to my LAN, it works just fine but then when I connected to the internet on the other side of the firewall it does not work. Please, i need help on this ASAP!

4 REPLIES 4
ede_pfau
SuperUser
SuperUser

hi,

 

please post some more infos: FortiOS version, VIP definition, policy. Preferable from the CLI/console, in text form. We'll see how I can help then.

Ede Kernel panic: Aiee, killing interrupt handler!
Ede Kernel panic: Aiee, killing interrupt handler!
Obie
New Contributor

Hello. Thanks for your response.

   Virtual IP

 1. External IP Address/ Range: Virtual IP address

 2. Mapped IP Address/Range: Server Local IP address.

 3. Port Forwarding

Protocol TCP  UDP  SCTP  ICMP External Service Port -  Map to Port -    VIP Group Name Comments0/255 Interfacewan1 (WAN TO AIRTEL)                   MembersWebserver-goglobal Webserver-80

POLICY TO ALLOW TRAFFIC

Incoming Interfacewan1  Source Address all Source User(s)Click to add... Source Device TypeClick to add... Outgoing Interfaceport2  Destination AddressWebserver-http-vip Schedule always ServiceALL ActionACCEPT

Firewall / Network Options

 NAT-DISABLED  

Security Profiles

 AntiVirusdefault                 default                Web Filterdefault                 block-security-risks                       default                       flow-monitor-all                       monitor-all                       web-filter-flow                Application Controldefault                 block-p2p                       default                       monitor-p2p-and-media                       P2P                       Youtube-Blocking                IPSdefault                 all_default                       all_default_pass                       default                       high_security                       protect_client                       protect_email_server                       protect_http_server                Email Filterdefault                 default                VoIPdefault                 default                       strict                SSL/SSH Inspectioncertificate-inspection                 certificate-inspection                       deep-inspection              

Traffic Shaping

 Shared Shaperguarantee-1Mbps             guarantee-1Mbps                 high-priority                 low-priority                 medium-priority                 shared-1M-pipe                 Special Shaper                 Very low bandwidth            Reverse Shaperguarantee-1Mbps             guarantee-1Mbps                 high-priority                 low-priority                 medium-priority                 shared-1M-pipe                 Special Shaper                 Very low bandwidth            Per-IP ShaperNo_bandwidth             No_bandwidth          

Logging Options

 Log Allowed Traffic  Security Events  All Sessions  Capture Packets Comments0/1023  Enable this policy  Cancel

rwpatterson
Valued Contributor III

You get much better readability if you post the configuration from the CLI instead of the web interface. The above is a hot mess.

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

Bob - self proclaimed posting junkie!See my Fortigate related scripts at: http://fortigate.camerabob.com
Sidewaysguy

Obie,

 

Please clarify, are you hosting this "Go Global" application or are you just trying to connect to it? 

 

If you are hosting it, then using a VIP, ports and creating the associated policy to allow traffic inbound will work.  If this is the case, you should be able to Telnet to the port from the outside if it has been opened.  Also, if there are multiple ports needed, you may need to create more than one VIP if the ports aren't in a range. 

 

As noted above, posting the config from the CLI would be preferred.

 

Thanks

 

Sidewaysguy

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors