Fortigate 80F 6.4.10 with 2 WAN interfaces into an SD-WAN.
WANs are set up to switch to "secondary" if "primary" is down .. and back to "primary" when it is up.
I want to set up a PC to continuously ping (with a script) and traceroute out through each ISP. So, a separate target destination for each WAN.
I've not gotten this to work yet. I've been trying with the FG CLI.
wan1 is primary and active; wan2 is secondary and not active
exec ping-option source [wan2 IP]
exec ping-options interface wan2
But, pings don't work with this....
And, separately, setting traceroute-options
exec traceroute-options source [wan2 IP]
exec traceroute 220.127.116.11
yields the wan2 IP hop and no more....