Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
championc1
New Contributor

Overlay Routing Protocol not working in SDWAN setup

Hi all,


I have a VPN connection working between a Hub and a Spoke.  I have assigned IP addresses to the VPN interfaces, and I can ping each of them locally, but I cannot ping each other across the VPN.  I want to get BGP peering working.

Is there something manual that needs to be done to enable the Overlay Routing Protocol on v7.0.12 ?  

Cormac Champion
Cormac Champion
1 REPLY 1
dbu
Staff
Staff

Hello @championc1 ,

Here is a good article to help you with your configuration:

https://community.fortinet.com/t5/FortiGate/Technical-Note-How-to-use-BGP-and-SD-WAN-for-advertising...

Here you can find how to configure ADVPN Hub and Spoke with BGP

https://docs.fortinet.com/document/fortigate/6.2.15/cookbook/820072/advpn-with-bgp-as-the-routing-pr...

Regards!
If you have found a solution, please like and accept it to make it easily accessible for others.
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors