Origin IP Changed

[GPC1]

I have upgraded the firmware from 7.4.1 to 7.4.2, after the upgrade I noticed that some of the addresses have been changed to ( 0.0.0.0/0 ) the address name remains but the IP has changed! does anyone face this issue? 

[ssteo]

Hello GPC1,

You can run command below and see what are the configuration change from 7.4.1 to 7.4.2.

diagnose debug config-error-log read

[GPC1]

I found the same issue in other firewalls, I ran the command but had no results

[hbac]

Hi @GPC1,

Can you check in the CLI by running this command "show firewall address"? Do you see 0.0.0.0/0 in the CLI as well? 

Regards, 

[GPC1]

Dear hbac,

we changed the affected IPs to the origin