I have upgraded the firmware from 7.4.1 to 7.4.2, after the upgrade I noticed that some of the addresses have been changed to ( 0.0.0.0/0 ) the address name remains but the IP has changed! does anyone face this issue?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello GPC1,
You can run command below and see what are the configuration change from 7.4.1 to 7.4.2.
diagnose debug config-error-log read
I found the same issue in other firewalls, I ran the command but had no results
Hi @GPC1,
Can you check in the CLI by running this command "show firewall address"? Do you see 0.0.0.0/0 in the CLI as well?
Regards,
Dear hbac,
we changed the affected IPs to the origin
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1640 | |
1069 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.