Hi all,
since there is a knowledge base article about it, I was wondering if a HA setup with the "exec ha ignore-hardware-revision enable" set is officially supported. Meaning will support assist in troubleshooting, if there are any issues with the firmware for example or specifically the HA clustering?
Thank you.
That backend vm infra will give you a good backbone but it in itself is not going to give you database HA specifically. It will help keep your vm running if a vm host were to go down for example but there are other issues that can cause a single database sever/vm to fail. A single dB sever is still a single point of failure even if you have a redundant infrastructure backing the vm.
Hi @VaultSec ,
I see no reason that support will refuse to assist you in this scenario.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1749 | |
1114 | |
765 | |
447 | |
241 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.