Hi,
We run a WAN network that has a multitude of applications (like CUCM) that already pre-tagged their packets for prioritization. Fortigates resets all of this as its default behavior. How do I stop this? I need all the prioritizations forwarded as-is. Do I have to set up a special rule just to handle this for every interface? This seems extremely unwieldy.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
yeap you need to enable QoS on the fw-policies for the traffic in the forward state and reverse state
e.g ( a fwpolicy output )
edit 1345
set srcintf "VoIPVLAN18" set dstintf "WANISP101ATT" set srcaddr "CUCMAO" set dstaddr "GWCUJCUBE" set schedule "always" set service "CUSTOM1" "CUSTOM2" "FGT2J" set diffserv-forward enable set diffserv-reverse enable set diffservcode-forward 101110 set diffservcode-rev 101110 next end
Keep in mind if you have any switches, you need to set trust diffserv for that port leading in and out of the fortigate.
I just wrote something for my blog about this & how you can monitor the fw sessions for policies
http://socpuppet.blogspot.com/2015/02/howto-fortigate-tosdscp-markup.html
PCNSE
NSE
StrongSwan
HWong
Did you find a solution to your problem? I'm having the same.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1633 | |
1063 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.