OSPF redistribution

[Erik_thomas]

I have a 310b running 5.2 code. Interface 1 is connected to a router that is supplying routes via OSPF. I need to redistribute these routes to a Cisco ASA that is connected to the same network as Interface 2 of the 310b. I know it has to be possible but I'm new to OSPF and Fortinet and not sure how to accomplish it. Any direction you can provide would be appreciated!

Thanks.

[emnoc]

OP

you should NOT need to do anything special. The routers present via the uplik router  as OSPF E1/E2 will be sent to the cisco ASA once you have establish ospf-adj on  the 2nd network.

[esalija]

Hi 

Please can you follow the KB - Technical Tip: How to redistribute routes from other sources in a dynamic routing protocol (RIP, OSP...