Hi all!
FortiGate 100E FortiOS 5.6.2
FortiGate 60E FortiOS 5.6.2
Does ADVPN support a dynamic routing via OSPF?
Sorry for my English.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi there! Yes it does.
Here's a example with RIP:
http://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-ipsecvpn-54/ADVPN/Config_Overview.htm
in the same document you can find: "...RIP (for simplicity, you could use OSPF or BGP) is then configured to run on the IPsec..."
Hope it helps!
The same document for FortiOs 5.6:
I saw the document for FortiOS 5.4, which indicates support only BGP or RIP for ADPVN. So in 5.6 ADVPN support BGP and OSPF dynamic routes?
I didn't find any example with ospf, but if I believe in the previous documents wich says that should work.
Here is an example with bgp:
http://cookbook.fortinet.com/configuring-advpn-in-fortios-5-4-dynamic-hub-and-spoke-vpns/
http://cookbook.fortinet.com/configuring-advpn-fortios-5-4-redundant-hubs-expert/
Cyas!
http://docplayer.net/48030709-Fortinet-auto-discovery-vpn-advpn.html
Slide №13
Dynamic Routing:
- BGP and RIPv2/RIPng are supported - OSPF, IS-IS and PIM are not supported
FortiOS 5.4
Yup, currently it supports iBGP and RIPv2/RIPnp so OSPF is not supported. Hopefully this changes in 6.0.
Dynamic Routing: - BGP and RIPv2/RIPng are supported - PIM/Multicast is supported as of FortiOS 5.6.1 - OSPF and IS-IS are not supported
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.