Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Redheckler
New Contributor

O2 SIM-FG 40F 3G4G-6.4.3- NOT obtainig address

Anyone had success geeting an O2 SIM to work with the 40F-3G4G. Straight out of the box upgraded to 6.4.3 and SIM inserted. . Followed all the google hits but no luck. Tried changing APN to idata.02.co.uk no change. Following output obtained. WWAN Interface shows up in CLI but down in GUIie. RED port

get system interface == [ wan ] name: wan mode: dhcp ip: 0.0.0.0 0.0.0.0 status: down netbios-forward: disable type: physical netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable mtu-override: disable wccp: disable drop-overlapped-fragment: disable drop-fragment: disable == [ wwan ] name: wwan mode: dhcp ip: 0.0.0.0 0.0.0.0 status: up netbios-forward: disable type: physical netflow-sampler: disable sflow-sampler: disable src-check: enable explicit-web-proxy: disable explicit-ftp-proxy: disable proxy-captive-portal: disable mtu-override: disable wccp: disable drop-overlapped-fragment: disable drop-fragment: disable

 

fnsysctl ifconfig wwan wwan Link encap:Ethernet HWaddr F6:DE:D6:AC:BF:AF UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0 Bytes) TX bytes:7064 (6.9 KB)

 

config system lte-modem set status enable set extra-init '' set manual-handover disable set force-wireless-profile 0 set authtype none set apn '' set modem-port 255 set network-type auto set auto-connect disable set gps-service disable set data-usage-tracking disable set gps-port 255 set band-restrictions '' set image-preference auto-sim set allow-modify-wireless-profile-table enable set sim-hot-swap enable set connection-hot-swap 5-minutes end

 

get system lte-modem status : enable extra-init : manual-handover : disable force-wireless-profile: 0 authtype : none apn : modem-port : 255 network-type : auto auto-connect : disable gps-service : disable data-usage-tracking : disable gps-port : 255 band-restrictions : image-preference : auto-sim allow-modify-wireless-profile-table: enable sim-hot-swap : enable connection-hot-swap : 5-minutes

 

diag sys lte-modem modem-details LTE Modem detailed information: Modem detected: Yes Manufacturer: Sierra Wireless, Incorporated Model: EM7565 Revision: SWI9X50C_01.08.04.00 dbb5d0 jenkins 2018/08/21 21:40:11 MSISDN: ESN: 0 IMEI: 3XXXXXXXXXXXX04 MEID: Hardware revision: 10001 Software revision: T.2.5.1-00508-9655_GENNCH_PACK-1 SKU: FSN: UF0186XXXXXXXXX7 PRL version: 0x0000 Modem FW version: 00.00.00.00 PRI version: 000.000_000 Carrier Abbr: AUTO-SIM Modem Operation mode: QMI_DMS_OPERATING_MODE_ONLINE

WAR-CIT-FW01 # diag sys lte-modem sim-info LTE Modem SIM card information: Active Slot: Slot 1. SIM state: QMI_UIM_CARD_STATE_PRESENT ICCID: 8944XXXXXXXXXXXXX966f IMSI: 23XXXXXXXXXXXXX5 Country: United Kingdom Network: O2 Ltd.

WAR-CIT-FW01 # diagnose test application lted 8 at$qcsimstat? $QCSIMSTAT: 0,SIM INIT COMPLETED

OK

 

 

 

 

 

 

 

1 REPLY 1
nsansone
New Contributor

Hello there,

Where is located the sim slot on this device? Are you using the USB rear port?

 

Regards

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors