Not found DLP GUI at fortios 6.4

[Tak]

How to enable DLP ?

[Patel]

Hi,

DLP is only available in CLI as in version 6.4

You can refer to the below link to configure it in CLI:

https://docs.fortinet.com/document/fortigate/6.4.0/administration-guide/153498/data-leak-prevention

Kind Regards,

Patel

[Tak]

how to enable it?

[tanr]

It looks like you have to do it all in the CLI now.  Someone else jump in if I'm wrong on this.

https://docs.fortinet.com/document/fortigate/6.4.1/cli-reference/429620/dlp-sensor

and

https://docs.fortinet.com/document/fortigate/6.4.1/cli-reference/321620/firewall-interface-policy

[Toshi_Esumi]

Looks like 6.2.2 or after.

https://kb.fortinet.com/kb/documentLink.do?externalID=FD46641

[tanr]

@Toshi, I can't find any reference to gui-dlp in the 6.4.1 CLI docs.  Might mean they dropped it.

[Toshi_Esumi]

@tanr, the KB I referred to is saying they dropped "set gui-dlp" under "config sys settings" since 6.2.2.

[tanr]

Ah, read that too fast!  Thanks for the clarification.

[neonbit]

DLP is not available in the GUI anymore, it's done in the CLI.

There are some DLP functionality you can use in the webfilter profile, but the rest is done in the CLI.

[unodosuno]

The DLP option is no longer available on the GUI and cannot be made visible on the GUI using the CLI. DLP is still functional on the releases 6.2.2 and later, however, configurable only from the CLI. 

https://kb.fortinet.com/kb/documentLink.do?externalID=FD46641