How to enable DLP ?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi,
DLP is only available in CLI as in version 6.4
You can refer to the below link to configure it in CLI:
https://docs.fortinet.com/document/fortigate/6.4.0/administration-guide/153498/data-leak-prevention
Kind Regards,
Patel
how to enable it?
It looks like you have to do it all in the CLI now. Someone else jump in if I'm wrong on this.
https://docs.fortinet.com/document/fortigate/6.4.1/cli-reference/429620/dlp-sensor
and
https://docs.fortinet.com/document/fortigate/6.4.1/cli-reference/321620/firewall-interface-policy
@Toshi, I can't find any reference to gui-dlp in the 6.4.1 CLI docs. Might mean they dropped it.
@tanr, the KB I referred to is saying they dropped "set gui-dlp" under "config sys settings" since 6.2.2.
Ah, read that too fast! Thanks for the clarification.
DLP is not available in the GUI anymore, it's done in the CLI.
There are some DLP functionality you can use in the webfilter profile, but the rest is done in the CLI.
The DLP option is no longer available on the GUI and cannot be made visible on the GUI using the CLI. DLP is still functional on the releases 6.2.2 and later, however, configurable only from the CLI.
https://kb.fortinet.com/kb/documentLink.do?externalID=FD46641
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1502 | |
1011 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.