A couple of issue have been popping up as of late. A few of our fortinets (ex:FortiWiFi 60D) Have not been able to register via the device GUI. I Put in all the info, but after I hit "OK", it spins and then nothing happens. I am also not able to add these devices to our Fortimanager.
The only way I am able to access these devices are through the Public IP. Though they are communicating across our network and working as they should, I am still not able to ping the management lan IP, add them to the Fortimanager or register them via the device GUI.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Have you checked you have enabled "FMG" on the outside interface on the Foritgate?
If you want to access your Fortigate via Webinterface over an interface you have to have http and/or https enabled in this interfac's properties.
For ping you have to have ping enabled there.
If you want to be able to add a device to yoour Fortimanager then the interface the connection goes to has to have FMG ACCESS enabled.
Plus of course you have to make sure (routing/policies etc) that the FortManager and you can reach the FOrtiGate ;)
--
"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1710 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.