Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
arie12092
New Contributor III

Not All SDWAN Members appear in static routing table

Hi,

We have created the SD-WAN and has 4 members.

We also create default route with sdwan enable.

When we 'get router info routing-table static', it only shows 3 SDWAN members.

Why does the static routing table only have 3 SDWAN members?

FortiGate 61F

 

Static.png

 

SDWAN.png

 

 

 

Thanks

Arie

8 REPLIES 8
akristof
Staff
Staff

Hello,

First, check this:

#get router info routing-table database

This will show you if route was at least created and maybe just SDWAN is disabling it.

Then, check health-checks. Check if health-check that has Tun-A-M1 is up or down. If health-check is down, it might remove route.

Adrian
arie12092
New Contributor III

Hi,

The 'get router info routing-table database' also shows only 3 Tun.

Then, the health check shows that Tun-A-M1 is up.

So why does the Tun-A-M1 not appear in the routing table?

Database.png

 

SDWAN Health.png

 

Thanks

Arie

akristof

Hi,

What FortiOS are you running? Can you check this setting, maybe you have non-default value:

Firewall (root) # show full system setting | grep ecmp
    set ecmp-max-paths 255
Adrian
arie12092
New Contributor III

Hi,

We are running v6.4.10

The ECMP max value is 255.

ECMP.PNG

 

Thanks

Arie

 

akristof

Hi, at the moment, only thing that I can suggest is to delete default route and re-create it (if you did not do it yet). Also, can you share configuration for that static route?

Adrian
arie12092
New Contributor III

Hi,

Here is the static route configuration.

Static route.png

 

 

Thanks

Arie

akristof

Hi, and recreating the route does not resolve it, right? I don't have anything else to check atm, because next thing I would be just checking VPN configs, IPs, kernel table, etc. Feel free to open TAC ticket.

Adrian
arie12092
New Contributor III

Hi,

We tried to recreate the route and it solves.

Also, when the FortiGate is rebooted, it also solves.

 

Thanks

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors