Recently updated a 60D HA pair from 5.2.3 to 5.4.2. It seems nothing is showing in the logging now.. I have it enabled so we should be seeing VPN Logins and that type of thing but nothing. Any ideas??
Tx
Mike
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Upgrade path is 5.2.3 to 5.2.5 to 5.4.0 to 5.4.2. Did you follow this? http://docs.fortinet.com/uploaded/files/2806/Supported%20Upgrade%20Paths%20to%20FortiOS%20Firmware%2...
Yeah I followed the upgrade path.... It ended up being a simple fix:
config log memory setting
set status enable
end
Logs were working before the upgrades but after entering that they started back.
Actually, I have a call open with Fortinet about something else. I asked them about why I can't see logging on my 60E. They said logging is disabled by default on all ports. Go figure. Every other firewall I ever used had logging enabled by default. I was going to write you about it.
go to Log & Report --> Log sitting.
enable Local Traffic Log
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1692 | |
1087 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.