No Logs after upgrade of 60D

[mwkirk]

Recently updated a 60D HA pair from 5.2.3 to 5.4.2.  It seems nothing is showing in the logging now..  I have it enabled so we should be seeing VPN Logins and that type of thing but nothing.  Any ideas??

Tx

Mike

[SCSIraidGURU]

Upgrade path is 5.2.3 to 5.2.5 to 5.4.0 to 5.4.2.  Did you follow this?  http://docs.fortinet.com/uploaded/files/2806/Supported%20Upgrade%20Paths%20to%20FortiOS%20Firmware%2...

[mwkirk]

Yeah I followed the upgrade path....  It ended up being a simple fix:

config log memory setting

set status enable

end

Logs were working before the upgrades but after entering that they started back.

[SCSIraidGURU]

Actually, I have a call open with Fortinet about something else.   I asked them about why I can't see logging on my 60E.  They said logging is disabled by default on all ports.   Go figure.  Every other firewall I ever used had logging enabled by default.   I was going to write you about it.

[hassan_zantout]

go to Log & Report --> Log sitting.

enable Local Traffic Log