Newbie: process for making a service available public?

[itboys]

Try to get use to the Fortigate system after using Sonicwalls for 10 years, what is the correct process for making a service available public?

For example two internal terminal services - RDP and on Prem Exchange services with OWA.

[wkana]

One way is to setup two VIP's within the Fortigate. Map your public IP's to your private IP's for both internal systems (RDP and your on-prem EXCH). Afterwards, configure your IPv4 Policies to allow traffic only on the specific ports/services you need. 

Hope this helps.

[Markus]

Hi and welcome to the Forums. Try this as starting point https://docs.fortinet.com/document/fortigate/5.4.0/cookbook/657500

https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/728694/policy-with-destination-nat

Please provide more infos like which FOS and tell us more about your network setup. Dou you use NAT, what is your setup (Wan/DMZ, where are the servers etc.)