Hi, I installed a second VLAN, but no computers from the new VLAN can reach the internet or ping the interface of the Fortinet-Firewall.
The new VLAN is in the same IP-Range, so it should be possible to ping it without routing.
Is there anything, preventing the Fortinet to accept calls from the VLAN?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi @TZ1 ,
Please can you run a sniffer command to check where the traffic is flowing:
# diagnose sniffer packet any "host <Source_IP> and host <Destination_IP>" 4 0 l
Best regards,
Erlin
I can try that later, but there is not much to be sniffed at - Laptop - Switch - Fortinet. From one Laptop to another one, works
Hi @TZ1 ,
Thanks for the answer.
Let's see if the traffic is coming at FGT or not. Also you can check with Debug commands:
# diagnose debug disable
# diagnose debug flow filter addr <client_ip> <server_ip> and
# diagnose debug flow show function-name enable
# diag debug flow show iprope enable
# diagnose debug console timestamp enable
# diagnose debug flow trace start 1000
# diagnose debug enable
Best regards,
Erlin
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1634 | |
1063 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.