- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Need info on log message...."fails due to un-assigned IP on AP AC"
What does this mean and how is it resolved? Suddenly a site with two 4200s, 832i's, is seeing this log message for many clients. No recent changes, rebooted APs and controller, same issue.
2016-Nov-28 15:39:34.629254 | e4:a7:a0:20:f4:63 | IP Address Discovered | IP = 169.254.128.12 fails due to un-assigned IP on AP AC = 00:0c:e6:16:74:c7. 2016-Nov-28 15:39:34.872565 | e4:a7:a0:20:f4:63 | IP Address Discovered | IP = 169.254.128.12 fails due to un-assigned IP on AP MAC = 00:0c:e6:16:74:c7. 2016-Nov-28
Thus the client can not get a DHCP address. Presumnable because AP 74:c7 wont releast client? Just a guess. This is happening an many APs.
tjhx
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Jimmy,
It appears that your client device is not getting an IP address and attempting to use a 169.254 address which the controller is not passing. What is your configuration?
I would look at DHCP and VLAN configuration as a starting point.
Kind regards,
Paul
