Need help

[natejasper]

Hello people,   Kindly after Adding Fortigate 60E (Standalone) in Company Network Windows 10 cutting LAN and Internet, as Windows 7 Users working Good.   Scenario :   Having Two ISP,s wan1 for Servers  Wan2 for Users As per configuration it works really good,no issue for traffic as it goes separately But on Windows 10 user,s cutting LAN and internet traffic. After Starting Windows 10 user,s machine network works a few minutes but it comes very slow with passage of time and at one point  (8-10 Mints) it stopped working on both LAN Access and internet.   Hope to receive help!

Thanks,

[sw2090]

hm this is rather few information. 

Maybe some debugging could help:

I would do a flow debug with one windows 10 machine as source:

diag debug ena

diag debug flow filter clear

diag debug flow filter saddr <ipofwindows10machine>

diag debug flow trace start <numberofpackets>

Then fire up the windows 10 machine and do something until it stops working. Fortigate CLI will show you what the Fortigate does to your traffic.

I here at work have >400 Windows 10 machines on 20 locations with Fortigates and all work fine...