Nat and access list configuration

[sims]

Hi all 

I am a newbie in fortigate 

How i can do the following ( clean migration of asa) 

[ol]

Create Zone :Inside, outside and Dmz)

Configure  route to inside , outside and Dmz

static nat 

Publish websites required port only [/ol]

Thanks 

[emnoc]

By RTFM ( polite  method ) you can start here

http://docs-legacy.fortinet.com/fos50hlp/52/

or

by searching in this forum. There's videso  fortinet and youtube that would walk you almost the  basic. And even the quickstart guide that comes in the fortigate box would help.

[norouzi]

[ul]

Create Zone :Inside, outside and Dmz)[ul]

Every interface in FortiGate works like a zone . But if you want to use more than one interface in a zone, you can create it in system>network>interface  (may be different place based on version )[/ul]

Configure  route to inside , outside and Dmz[ul]

Router>static[/ul]

static nat [ul]

Firewall objects> IP Pool[/ul]

Publish websites required port onl[ul]

Firewall objects> Virtual IP[/ul][/ul]

Then you must create policies that you want on policy menu.