Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
player
New Contributor

NAT on vdom links not working

Hi all,

 

i'm running 5.2.4 on 60d poe with software sw on the unit, i have tested the following scenarios :

1. NAT on vdom link - not working

2. NAT using 2 hardware interfaces (Internal3 and Internal4)dedicated to hardware vdom link - not working

 

the scenarios are very simple ones and the debug flow shows that NAT is not happening.

any ideas?

player. rock the boat , dont sink the ship
player. rock the boat , dont sink the ship
2 REPLIES 2
emnoc
Esteemed Contributor III

Never heard of that, but the policies that you have NAT on are the packet flat out being dropped?

 

A hardware  interface wire back2back which is what I assume is the later scenario should not be impacted. About the only limitations I've seen on vdom-link is you can use them for GRE-tunnel

 

Ken

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
player
New Contributor

Hi emnoc,

 

the packets are not dropped - forwarded without nat,

what limitation of vdom link in regards to GRE is there - i have this exact configuration working beautifully on version 4 build 356  :)

 

player. rock the boat , dont sink the ship
player. rock the boat , dont sink the ship
Labels
Top Kudoed Authors