- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
NAT on vdom links not working
Hi all,
i'm running 5.2.4 on 60d poe with software sw on the unit, i have tested the following scenarios :
1. NAT on vdom link - not working
2. NAT using 2 hardware interfaces (Internal3 and Internal4)dedicated to hardware vdom link - not working
the scenarios are very simple ones and the debug flow shows that NAT is not happening.
any ideas?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Never heard of that, but the policies that you have NAT on are the packet flat out being dropped?
A hardware interface wire back2back which is what I assume is the later scenario should not be impacted. About the only limitations I've seen on vdom-link is you can use them for GRE-tunnel
Ken
PCNSE
NSE
StrongSwan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi emnoc,
the packets are not dropped - forwarded without nat,
what limitation of vdom link in regards to GRE is there - i have this exact configuration working beautifully on version 4 build 356 :)