Hi all,
i'm running 5.2.4 on 60d poe with software sw on the unit, i have tested the following scenarios :
1. NAT on vdom link - not working
2. NAT using 2 hardware interfaces (Internal3 and Internal4)dedicated to hardware vdom link - not working
the scenarios are very simple ones and the debug flow shows that NAT is not happening.
any ideas?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Never heard of that, but the policies that you have NAT on are the packet flat out being dropped?
A hardware interface wire back2back which is what I assume is the later scenario should not be impacted. About the only limitations I've seen on vdom-link is you can use them for GRE-tunnel
Ken
PCNSE
NSE
StrongSwan
Hi emnoc,
the packets are not dropped - forwarded without nat,
what limitation of vdom link in regards to GRE is there - i have this exact configuration working beautifully on version 4 build 356 :)
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.