Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
New Contributor

My Fortigate don' t log any traffic

Hello, I have an issue, my Fortiwifi 60C don' t log anything in the traffic log. I' ve setup the default deny rule to log denied traffic but it don' t log anything. I only gets log in the " Invalid Packets" section of the " Traffic log" . The other logs like System logs are working fine. Here is my logging setup :
config log disk setting
     set max-policy-packet-capture-size 64
     set log-quota 1024
     set report-quota 1024
     set maximum-log-age 0
 config log disk filter
     set severity warning
 config log setting
     set daemon-log enable
     set fwpolicy-implicit-log enable
     set fwpolicy6-implicit-log enable
     set log-invalid-packet enable
     set neighbor-event enable
Do you have an idea of what can be the problem ? Thank you
Honored Contributor

config log disk filter set severity warning end
Shouldn' t the Minimum log level be set lower if you want to see more traffic info?

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C


I have the same problem... when i have upgraded FGT 60c to 5.0.2 logs aren' t wrote visibles on shdc ! on gui i can' t show nothing Please help !
New Contributor

Hello, the same here after Upgrade to 5.0.2. Greets

find solution my frind: config log disk setting set status enable end this is enable log on internal disk... but... where are the categories like web filter, application log ecc.. ?!??! Still a mistery.
New Contributor

config log disk setting set status enable end
Thanks for the tips, after that cmdline the option is available (again) in the FortiGate manager. All is done to force customers to use forticloud and Co

My fortigate 60c display right the logs after format the shdc. i still search e method to display old categories like antivirus / application filter ext.. i found this on the manuals: config [antivirus/webfilter/spamfilter…..] profile edit (profile name) set extended-utm-log enable end test it and tell me if you re right for enable syslog server: config log syslogd setting set status enable set server " x.x.x.x" set facility local6 end