Multiple virtual IPs with different destinations for one static external IP

[RedMt]

Hi All,

Is it possible to use virtual IPs to forward traffic received on the same external IP address to different destinations based on the port of the traffic? Additionally, can I use a source filter for the same external IP and port to send traffic to a different destination than a similar virtual IP with no source filter?

For example, could I set up all of these in unison and have them all forward as described:

VIP1: 1.1.1.1:80 & no source filter -> 2.2.2.2:80

VIP2: 1.1.1.1:81 & no source filter -> 3.3.3.3:81

VIP3: 1.1.1.1:80 & source filter for 4.4.4.0/24 -> 5.5.5.5:80

VIP4: 1.1.1.1:80 & source filter for 4.4.5.0/24 -> 5.5.5.5:80

These IP addresses are not real-world examples, and I understand that related policies allowing this traffic would be required. Also, I believe I understand how to set these up in the firewall, I'm just not sure if any of it will work as I expect.

Thanks for any help.