Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Steve_Fuller
New Contributor III

Multiple time server values possible?

Not finding any documentation for multiple hex values for times servers.

5 REPLIES 5
Markus
Valued Contributor

Yes, you can have multiple time servers, but you have to use cli https://forum.fortinet.com/tm.aspx?m=103705

Best


________________________________________________________
--- NSE 4 ---
________________________________________________________

________________________________________________________--- NSE 4 ---________________________________________________________
Steve_Fuller
New Contributor III

Let out the most important part, time servers within dhcp.

Dave_Hall

NTP server addresses to be handed out to dhcp clients are configured/setup under config system server entries.  You can define up to 3 NTP servers by setting ntp-service specify then set values for ntp-server1, set ntp-server2, set ntp-server3, etc.

 

See https://docs.fortinet.com/uploaded/files/3950/fortigate-cli-ref-56.pdf#%5B%7B%22num%22%3A3446%2C%22g...

 

Steve Fuller wrote:

Let out the most important part, time servers within dhcp.

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
ede_pfau

Those params are in 'config system dhcp server'.

Ede Kernel panic: Aiee, killing interrupt handler!
Ede Kernel panic: Aiee, killing interrupt handler!
Steve_Fuller

Not sure if the Shoretel phones will accept non-standard (not 04) time settings--will try.  Thanks to all.

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors