Hi
I already created an ipsec remote access tunnel and it is working. I want to create second tunnel for a different group but it does not connect. How can i do that?
Solved! Go to Solution.
Hi Reza,
Have a look at these document which shows how to establish more than one IPsec tunnel with same pair of IP :
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-establish-more-than-one-IPsec-tunne...
If the above does not match your scenario have a look here it might help:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-use-Peer-IDs-to-select-an-IPSec-dia...
https://community.fortinet.com/t5/Internal-Knowledge-Base-Articles/Technical-Tip-Using-Peer-ID-to-co...
Hi Reza,
Have a look at these document which shows how to establish more than one IPsec tunnel with same pair of IP :
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-establish-more-than-one-IPsec-tunne...
If the above does not match your scenario have a look here it might help:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-use-Peer-IDs-to-select-an-IPSec-dia...
https://community.fortinet.com/t5/Internal-Knowledge-Base-Articles/Technical-Tip-Using-Peer-ID-to-co...
Thanks it solved my problem. Is there any blogs on intetnet about fortigate tips and tricks?
Happy to hear your issue is solved.
Regarding tips and tricks i believe you can follow this document with best practices how to secure your network:
https://docs.fortinet.com/document/fortigate/7.4.0/best-practices/555436/hardening
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1735 | |
1107 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.