Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
kanes39
New Contributor III

Multiple VPN (ipsec) To Same Destination

Hi Team,

 

I have configured 2 IPSEC to the same remote destination and it was working fine with version 6.4 however after the upgrade it stopped working. The reason for that is that the Tunnel ID for the second tunnel is assigned with an IP of 10.0.0.1 and not the public IP (which is assigned to the first IPSEC). Apparently, there is a behavior change on version 7.2. (In general, tunnel IDs are assigned the IP address of the remote gateway. If multiple tunnels use the same gateway IP address, then a random IP address from the subnet 10.0.0.0/8 is assigned).

 

Has anyone encountered a similar issue and what is the recommended fix?

 

Appreciate your help and assistance.

 

12 REPLIES 12
Networkman

Did you get this fixed? I have the same issue with 7.2

kanes39
New Contributor III

Hi @Networkman ,

 

This was actually not a fault but more of a feature changes.
We did not have to fix it, we reset the route table and it was able to use both the links although the public IP was different.

mfaisal1986

hi @kanes39 

how did you reset the routing table as I'm facing the same problem and will this delete all the static routes I did before? 

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors