Hello,
we have set up a VLAN for "spectralink dect base-stations" here.
The base stations are connected to several Fortis switches.
Here there seems to be a problem with multicast, the devices can not sync across multiple switches. (on the same switch it works).
What must be set up in the Fortigate so that the multicast works across switches?
The manufacturer gives the following information:
https://support.spectralink.com/sites/default/files/resource_files/Synchronization%20and%20Deploymen...
There are two possible solutions to this:
l Give the highest priority to a custom IP priority and configure the server to apply this IP priority
to PTPv2 traffic.
l Give the highest priority to multicast UDP packets on port 319 with the destination address
224.0.1.129 (IPv4) or FF02::181 (IPv6).
Thanks for help!
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
What model FortiSwitch and FortiGate? What OS versions?
This might be a good start to read over? https://docs.fortinet.com/document/fortiswitch/7.2.4/fortilink-guide/173274/configuring-igmp-snoopin...
Created on 04-05-2023 11:08 PM Edited on 04-05-2023 11:09 PM
Thanks for reply,
Foritgate 500e with v7.0.9 b0444 and several FortiSwitch 448D with v6.2.4.
(managed over 500e)
In this case?
config system interface
edit vlan100
set switch-controller-igmp-snooping enable
set switch-controller-igmp-snooping-proxy enable
next
end
I'm pretty sure you need to follow all of those configuration options as outlined in the IGMP doc. Please try at least. And then check if you see your groups showing up under:
diagnose switch-controller switch-info igmp-snooping group <SWITCH_ID>
diagnose switch-controller switch-info igmp-snooping status <SWITCH_ID>
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1702 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.