Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
greelanx
New Contributor

Multicast forwarding

Hello, hopefully you can help me. I have a UPnP/DLNA media server running on my LAN (interface: internal) and would like to stream movies/music to my tablet which is connected to the FortiAP. I did some research and found the following: > When a UPnP capable device joins a network and wants to know what UPnP services are available on > the network, it sends out a discovery message to the multicast address 239.255.255.250 on port > 1900 via the UDP protocol. This message contains a header, similar to a HTTP request. This > protocol is sometimes referred to as HTTPU (HTTP over UDP). I searched the Fortinet KB and it says: > FortiGate devices do not support Universal Plug and Play (UPnP). > This includes FortiOS versions 2.36, 2.50, 2.80, 3.0, 4.0 and 5.0 Now I' m confused. Fortigate is able to do multicast routing / forwarding even TTL can be configured but it doesn' t support UPnP/DLNA which uses multicast? From the CLI manual: > set multicast-forward {enable | disable} > set multicast-ttl-notchange {enable | disable} I' m not so familar with multicast. So far as I know multicast ist a " one to many" communication. What I need is forwarding all multicast traffic from internal to wifi. e.g. 192.168.1.x => 172.16.1.x Note: I do NOT want to combine wifi and internal interfaces into a single subnet and will do that never as this makes no sense. Wifi and LAN should be seperated. So my question to the specialists: is it possible and if yes how? :-) Thank you!
6 REPLIES 6
greelanx
New Contributor

No one has an idea?
wolvetk
New Contributor

Have you tried:

 

config firewall multicast-policy edit 0 set srcintf internal set dstintf wifi next end Bye André

emnoc
Esteemed Contributor III

And ensure the the TTL is adequate and will not be exceeding  ( it needs to be greater than 1 ;) )

 

Ken

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
bshimkus
New Contributor III

emnoc wrote:

And ensure the the TTL is adequate and will not be exceeding  ( it needs to be greater than 1 ;) )

 

Ken

How do you do this?

 

bks

FortiGate-60E, 2 x FortiAP-224D, FortiSwitch FS-108D-POE, FortiRecorder-100D, 3 x FortiCam-FD40

FortiGate-60E, 2 x FortiAP-224D, FortiSwitch FS-108D-POE, FortiRecorder-100D, 3 x FortiCam-FD40
emnoc
Esteemed Contributor III

Can you select the TTL? Since this a discovery usage I bet not. Discovery typically stay local on the LAN. Do a pcap and inspect the TTL.

 

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
s_gelineau

Hi, 

 

I have a same problem on Fortigate 30E and FortiAP 221C, did you found a solution?

 

Thanks

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors