- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Multicast Traffic over IPsec VPN
Hello!
My situation:
I have an IPsec VPN Tunnel established with another Fortigate. Inside this tunnel I have configured a GRE Tunnel to received multicast packets through the IPsec Tunnel.
The IPsec Tunnel is Up as well both the Phase 2 Selectors for the IPsec Tunnel & GRE Tunnel. I am able to reach the remote IPsec Tunnel Gateway & and the remote GRE Tunnel Gateway.
Multicast is configured on my end, and I was able to do a static join from my 60F to the Multicast Source.I run a diagnose sniffer packet <GRE> and I can see the packets from the GRE tunnel reaching my firewall.
My problem is, I cannot for the life of me get the packets to reach my internal interface.
I have policies setup to allow traffic from the GRE Tunnel to my Internal interface and reversed (of which I have tried a stupid amount of variations I could think of that made sense). I still can't get the traffic to my internal interface.
Please help.
- Labels:
-
6.2
