Good people of Fortinet community. I need some help in implementing a multilink failover setup.
We have 2 main sites connected as shown in the diagram below
Both sites have WAN links on X1 with a failover Virgin link between sites.
We currently route all traffic on main site through X1: 195.57.84.0/24.
I want to set up in such a way that only web traffic on main site goes through X1. All other traffic (ipsec, dnat, snat, etc) goes through X2 VLAN 280: 195.57.85.150, but should be able to failover to X2 VLAN 110: 10.10.1.1 should VLAN280 goes down.
Would this just require static routes with different priorities and policy routes, or would putting VLAN 280 and VLAN 11O in SD-WAN be a better option?
Your opinion is highly appreciated.
Thanks!
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello
You can do it with policy route, but for sure SD-WAN is the best option.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1546 | |
1030 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.