Thank you for your replay!
FGT 500E is not managed through FortiManager but this is not the case.
Reason I need to configure Security Fabric Setup is because need to check/turn on SAML SSO on my FortiClientEMS.
So basicly need Security Fabric Setup tab on my FortiGate to configure Security Fabric SetupSAML.
In FortiGate 6.4.8 administration guide i notice this:
- FortiGate devices must either have VDOMs disabled or be running in split-task VDOM mode in order to be added to the Security Fabric. See Virtual Domains.
- FortiGate devices must be operating in NAT mode.
So it is possible there is no Security Fabric Setup tab because I got multivdom enabled in my FGT500E?