I would like your support, my old device id fortigate 600C with firmware 5.6.13, I buy a new one is fortigate 600E, firmware is 6.0.2, I used admin account backup configure file from 600C, and I try to restore these configure file to 600E, but it's away said its require password, but during I backup configure I do not put any password, so how I solve these issue, or which method that I can migrate configure from 600c to 600e with a few effect
PS: I understand number of port between these 2 model is difference , but for production port I used only 4 interface
Unless your config is extremely long, just configure it manually from scratch. This will help you remove old configurations that you no longer need and likely improve security.
You can also manually edit the config file to make it compatible with the new firmware. But this requires a lot of expertise. If you make a single mistake, the entire process will fail. Note that you will not be provided with TAC support if you face any issues during or after the migration.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.