- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Max concurrent Site to Site connections on a FortiGate 100D?
I'm looking to find out how many concurrent site to site vpn connections can be handled by a FortiGate 100D. It would be acting as a vpn concentrator
The current WAN connection is 100Mb. Each connection would be using on average 1Mb/s.
Is there a hardware or software limitation on the number of connections?
The WAN speed can be increased if needed.
Thanks!
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
For the hard limit of FGs, you can refer to the max values table below:
http://help.fortinet.com/fgt/54/max-values/5-4-0/max-values.html
How many you can practically put in one physical connection is up to total amount of traffic on the cable you need to estimate.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
For the hard limit of FGs, you can refer to the max values table below:
http://help.fortinet.com/fgt/54/max-values/5-4-0/max-values.html
How many you can practically put in one physical connection is up to total amount of traffic on the cable you need to estimate.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This is exactly what I'm looking for. Thank you so much!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
are there any further details about maximum VPN encryption settings i.e. can the 100D handle 200 x site-2-site tunnels (with phase1-proposal AES256/SHA256 and phase2-proposal AES256/SHA256 or even higher SHA512) ?
On the far ends are 30D and 30E.
thank you,
