Many to Many VIP

[#1]

Hi, I was wondering if there is any way to create a Virtual IP that maps a range of external addresses to a range of internal addresses? The reason I would like to do this is I have quite a few web servers on the internal network that are accessed from the internet. Instead of adding 10 individual VIPs, one for each web server, I would like to be able to create a VIP that maps the range of IP addresses. e.g. public: 65.65.65.0 to 65.65.65.31 is mapped to private: 10.10.10.0 to 10.10.10.31. Or is there an easier way to do this? I am running v2.80 MR11 on a 100A unit. Thanks, Doug

[UkWizard]

not really, create the list in notepad and paste it into the CLI, thats the quickest way. Just work our the lines needed to make the entry (looking at a current config dump should show you how the lines should be constructed.

[#3]

Thanks for the advice. That' s exactly what I did. To be more specific, because I had 60 VIPs and corresponding policies to create, I created an excel spreadsheet with names and IP addresses, and then used MS Word to mail merge each excel row into a config file block containing the appropriate name and IP. Then I was able to copy and paste into the CLI to create all the VIPs and policies. I notice that v3 can map address ranges. That sure would make my policy list a lot simpler! Instead of 60 policies, I would have about 8. Thanks, Doug