Hi,
When you have an LACP aggregated link and/or VLAN interfaces in a fortigate at what "level" are you supposed to set the MTU?
On our different generations of switches I have seen different behavior and I don't know which applies to Fortigate.
I have seen:
- Jumbo frames are set per vlan
- Jumbo frames are set per port (on the port level and not the lag level)
The FortiOS system interfaces table contains items for each port, vlan and lag so where am I supposed to set the mtu?
Thanks!
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hey thanks for the reply!
The point of the question is that none of these documents address what the priority/order of defining custom MTUs should be.
So should I be defining on the port + lag + vlan? port + vlan? lag + vlan? vlan only?
It is not clear from the docs.
The documentation you linked to suggests port + vlan, however they are not using an LACP aggregate.
From some experimenting it seems to be lag first then vlans under the lag and no need to set on the ports that make up the lag.
But tbh I still don't know 100% if I wasn't supposed to also set this at the port level and I would much rather *know* how it is supposed to work than try to establish it through trial and error.
Thanks again!
Anyone?
Technical Note : How to adjust the Maximum Transmission Unit (MTU) value on a FortiGate interface
https://kb.fortinet.com/kb/documentLink.do?popup=true&externalID=11745&languageId=
Technical Tip: Define MTU size larger than 1500 on VLAN interfaces
Thanks
Kangming
Hey thanks for the reply!
The point of the question is that none of these documents address what the priority/order of defining custom MTUs should be.
So should I be defining on the port + lag + vlan? port + vlan? lag + vlan? vlan only?
It is not clear from the docs.
The documentation you linked to suggests port + vlan, however they are not using an LACP aggregate.
From some experimenting it seems to be lag first then vlans under the lag and no need to set on the ports that make up the lag.
But tbh I still don't know 100% if I wasn't supposed to also set this at the port level and I would much rather *know* how it is supposed to work than try to establish it through trial and error.
Thanks again!
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1703 | |
1092 | |
752 | |
446 | |
229 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.