Hello,
Is it advisable to use MGMT port as one of the heartbeat interfaces for HA (on FGT-200F, for example)? I remember reading somewhere Fortinet recommending NOT to use MGMT interface for general traffic, but what about HA?
Cheers,
Slavko
NSE 7
All oppinions/statements written here are my own.
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello NotMine,
Usually mgmt interface is used for dedicated Out of Band Management of the device.
However, if you like to use it as a backup heartbeat interface for HA, there is no harm in doing that.
you may go ahead and configure it and it will work just fine.
Hello NotMine,
Usually mgmt interface is used for dedicated Out of Band Management of the device.
However, if you like to use it as a backup heartbeat interface for HA, there is no harm in doing that.
you may go ahead and configure it and it will work just fine.
kinda sounds like you may have a hardware problem. You can try using the management interface as a test, also check the interface in the cli and the cli configuration.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1673 | |
1083 | |
752 | |
446 | |
226 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.