Hi. Does the FG40F and FG80F support lower speed connections on the RJ45 ports? For example, the FG40F has 5Gb WAN port, could it support a 1Gb ethernet connection from a provider? I ask because I'm used to Cisco documentation stating things like 10/100/1000mb to show backward compatibility in speed. I'm fairly sure the fortinet will support lower speeds, but just doing a sanity check since it's not specifically stated in the data sheets.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
At least FG40F doesn't have a multigig (5G) wan port. Only 5Gb I see in the spec is Firewall throughput.
https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/fortigate-fortiwifi-40f-series.pdf
Toshi
All physical copper ports on any FGT of the D, E or F series do support 100 Mbps and 1 Gbps.
More exotic speeds like 10 Mbps, 2.5 Gbps or 5 Gbps are not supported AFAIK.
SFP fiber ports sometimes support 100 Mbps beside 1 GBps. SFP+ ports support 1 or 10 Gbps, but no autonegotiation.
But then again, does it matter? In nearly every network you have a switch, which, beside other tasks, does convert between interface speeds.
If your question aims at 'will it handle LESS throughput than the rated interface speed', then yes, that is always the case. Usually, you think about interface speeds if your line gets upgraded. So, the answer for connection speed is above, and for throughput is this.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1697 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.