Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
TechBC
New Contributor

Logging to external USB disk

Hello there I have F60C v4.0,build5849,110804 (MR2) I noticed that there is the USB port to load configuration or to backup configuration. Could you please tell me if I can attach an external USB disk to increase details and size of logs and reports? TIA
8 REPLIES 8
nicolez
New Contributor

Hello TIA! Logging to external USB devices is not possible. In an old V3 firmware there was an option to log to external network devices, but this option has gone very fast again. For your box, there is no v3 firmware. If you need more logging capacity you should think about an Analyzer or FAMS. Syslog would be the cheapest option, but then you have to crate your reports at your own. In fact, please upgrade the 60c. You are using an interims build of firmware....using an official version would be better. The 60c is running much better with the latest one 4 MR3 P5. best Regards, Nicole
mbrowndcm
New Contributor III

Syslog should be fine with a solution search-engine like solution. I' m looking into Splunk with the free license right now and it is very easy to create reports with syslog data.
" …you would also be running into the trap of looking for the answer to a question rather than a solution to a problem." - [link=http://blogs.msdn.com/b/oldnewthing/archive/2013/02/13/10393162.aspx]Raymond Chen[/link]
" …you would also be running into the trap of looking for the answer to a question rather than a solution to a problem." - [link=http://blogs.msdn.com/b/oldnewthing/archive/2013/02/13/10393162.aspx]Raymond Chen[/link]
SYQUEST
New Contributor

I find that interesting, one of my clients has an FG60C with FW 4.2.8. I installed an 8GB flash drive to the USB port, then setup file logging space for the various log types. I just recently had an event that the log file was 75% full, so I increased the allotted space to handle more traffic. In the webui traffic and event windows it also gives you the option to view memory buffer or disk. So unless I am dreaming, FW 4.2.8 lets you log to external disk! Are we discussing the same thing or something else? ....JIM....
bbache99

Hi Jim, I am trying to do exactly this on a 60B but cannot see anywhere in the GUI a place to enable logging to an external drive. Could you please explain how you achieved this on a 60C? Thanks, Ben
Carl_Wallmark
Valued Contributor

I find that interesting, one of my clients has an FG60C with FW 4.2.8. I installed an 8GB flash drive to the USB port, then setup file logging space for the various log types. I just recently had an event that the log file was 75% full, so I increased the allotted space to handle more traffic. In the webui traffic and event windows it also gives you the option to view memory buffer or disk. So unless I am dreaming, FW 4.2.8 lets you log to external disk!
The FortiGate 60C has 8 GB of flash memory, and is called " Disk" in the GUI, i bet its that you see.

FCNSA, FCNSP
---
FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30B
FortiAnalyzer 100B, 100C
FortiMail 100,100C
FortiManager VM
FortiAuthenticator VM
FortiToken
FortiAP 220B/221B, 11C

FCNSA, FCNSP---FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30BFortiAnalyzer 100B, 100CFortiMail 100,100CFortiManager VMFortiAuthenticator VMFortiTokenFortiAP 220B/221B, 11C
SYQUEST
New Contributor

If that is the case, why would Fortinet provide USB Disk formatting capability on the devices that have USB jacks? I have included a screen shot of the page that shows the disk allotment. In the Administration Guide for Version 4.0MR2 see formatting USB Disks on page 198. I will have to do further evaluation of the USB flash disk to see if it actually has any other files on it besides the configuration backup file. I guess that would provide more proof one way or the other. If you can' t put the logging files on a USB flash disk, why have flash disk capability??? I have an FG60B too, but I need to update the firmware to 4.2.8 or later and try the USB disk on it and see what happens... ....JIM....
Carl_Wallmark
Valued Contributor

Thats because USB drives are used for storing configuration and firmware, nothing else. The flash on your screenshot is the built-in " disk" on the 60C.

FCNSA, FCNSP
---
FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30B
FortiAnalyzer 100B, 100C
FortiMail 100,100C
FortiManager VM
FortiAuthenticator VM
FortiToken
FortiAP 220B/221B, 11C

FCNSA, FCNSP---FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30BFortiAnalyzer 100B, 100CFortiMail 100,100CFortiManager VMFortiAuthenticator VMFortiTokenFortiAP 220B/221B, 11C
GertVdJ

Hi Carl,

I saw your (old/2012) answer on this Q.

Can external USB disks still be used for config/firmware only?

Even in 2022 and with FortiOS 7.*?

Tia.

Gert

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors