- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Locate wifi clients when not connected
Hey,
We are using a Forti 100F as a firewall and have several FortiAP 231F in different locations. These are all on the same network and directly connected. Now the question is, is it possible to use the "locate wifi clients when not connected" feature without an extra server and without using Aeroscout (because we don't want to use another server for that). If so, is there any documentation on what needs to be done to use this feature, or does it just need to be enabled? Another question would be where these disconnected clients are listed and how to distinguish them from the "normal" connected clients.
Thanks for your help!
- Labels:
-
FortiAP
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Praktikant,
Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.
Thanks,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You can refer to this section of the Configuration guide. The collected information is sent to FortiPresence which process the data and offers further analysis.
If you have found a solution, please like and accept it to make it easily accessible for others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks for the answere. We are using 40+ AP's right now and we don't wanna spend that much money for FortiPresence. Is there a way to just track the wifi clients when not connected and get their MAC Adress for safety reasons, e.g. for thievery? We do not need any other features like Heatmaps etc.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Or is the point "viewing device location data on a FortiGate unit" the feature i am looking for without buying any new software? (We are already using FortiAnalyzer but not FortiPresence)
