hi, my name is Armando, from CDMX
I am facing an problema, I wan to return to factory values a FAZ 2000B, I execute the command "execute restore image tftp FAZ_2000B-v5-build0724-FORTINET.out 192.168.2.137" and only updates the FAZ 2000B, does not return to factory values.
The problem I have is the imagen attached
the FAZ has not console port, I am connect with a monitor
thanks.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Please use "execute reset all-settings" for factory reset.
regards,
hz
thaks, a question
have you ever loaded the firmware by interrupting the boot sequence
Thanks...
Armando Gomez Barrios wrote:
have you ever loaded the firmware by interrupting the boot sequence
Yes, that will reset all-settings too. BTW, if you want to completely remove all old contents, you will need format disk by "exe format disk-ext4 <raid-level>"
regards,
hz
okay, thanks
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1546 | |
1030 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.