Hi,
I ve got 2 fortigate 100d, which are stacked/HA'd. Currently have one ISP all traffic going will go via WAN 1.
I'll be getting a second link put in and wanted to know how to go about putting one ip range on a load balance, 90% WAN2 and 10% WAN1 without re configuring the whole firewall.
Any help would be much appreciated.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
You may try to set up "WAN Link Load Balancing Interface" on v5.2. Thanks.
Check CLI reference from docs.fortinet.com.
Inside the VIP configuration, from
set ldb-method {first-alive | http-host | least-rtt | least-session | round-robin | static | weighted}
you should use "weighted". But I will never use such thing by myself because there are web pages that need a specific outgoing IP-address, either for security reasons or just for a session-keeping, and then such configuration can easily break normal use of web pages if two packets from the same computer come from two or more different external IP-addresses.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1688 | |
1087 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.