Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Live IP range on WAN1 and on DMZ.
Hi all, we're looking at putting a 60d in place and have 4 live servers already configured with Live IP addresses.
Problem is that the WAN1 port needs our first live ip and our live servers are on the same subnet so that isn't possible - so it would seem.
I really don't want to have to change my Live IPs on my servers to private ip's and VIP to them, is their any way to get the Live IP's on the DMZ port?
1 REPLY 1
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Why would you not use VIPs for this, as they are the built for exactly this purpose? There is no other way to forward traffic through the FGT.
Alternatively, you could put a switch behind your router and connect the servers and the FGT to it. Your servers would not be proteced then but would be able to use a public IP address.
Ede Kernel panic: Aiee, killing interrupt handler!
Ede Kernel panic: Aiee, killing interrupt handler!